PROFINET Forum

Webinar_Question

Is the Siemens Simatic IPC847E/D still required for the ETS setup or is any PC with the required operating system and network card sufficient?

Webinar_Question

Will Security class I support be mandatory for PN certification?

Webinar_Question

How do I get the update for the ETS? Is it in the test bundle and for free?

Webinar_Question

When do you expect the trial bundles to become the "official" certification tool?

Webinar_Question

Will the CP1616 also be replaced for SPIRTA and the PROFIsafe Layer Tester?

Webinar_Question

Could you please share detailed information about the ETS HW used in certification?

Webinar_Question

Will the netload robustness test also be transferred to the ETS?

Webinar_Question

What is the use of APL rate limiter in ETS APL test setup?

Webinar_Question

With APL being ethernet based, do you think customers will be more concerned about cybersecurity? What is the status of PROFINET and cybersecurity?

Webinar_Question

Which evolution kit / HW you will prefer to do the PoC?

Webinar_Question

How is it possible to build switches with high port counts. So far I see 1- or 2-ports PHYs. Switch-IC with 10Mbit/s support are very rar. Do you have any advice on how to realise APl switches with high port numbers?

Webinar_Question

How are the conformance test for certification on data and power applicable to other systems than the UNH test system mentioned in the official specifications?

Webinar_Question

Can you please provide more information on the status and future plans for PROFIdrive / Encoder Profile Tester?
Are there plans to use ETS for the related tests?
In this context: Which S7 PLC exactly replaces (or in future shall replace) the CP1616? Is it S7-1516?

Webinar_Question

Do I need to wait for PROFINET Test Bundle Version 2.45 to use the ETS for precertification (because of not full migrated yet)?

Webinar_Question

To certify a PROFINET controller a file (comparable to the GSD file) is needed. Where do I get this file from?

Webinar_Question

If a PROFINET device is only produced for one manufacturer, does it still have to be certified?
And if so, who has to commission the certification?

Webinar_Question

Can an existing GSD V2.42 be extended to include a new device as of June / July 2024?

Webinar_Question

Can the ART Tester handle only the latest GSDML file version, or is it downward compatible?

Webinar_Question

Which configuration of a device is used for the certification test if the DUT is capable of many different modules/submodules? Is it always the default configuration?

Webinar_Question

Is the version of the ETS board always the same, or does it change? Is a new version planned?

Webinar_Question

Certification is mandatory before a device can be offered for sale.
What is meant with “device”?
Does the term “device” include both IOC and IOD?

Webinar_Question

If I use a microchip with a certified PROFINET stack to develop my new device, do I need to get the certification as well or is not necessary in this case?

Webinar_Question

Will it be possible to buy all the needed hardware as a bundle?
And if, what is the price?

Webinar_Question

Is it possible to use the CP1616 with the upcoming PROFIdrive Profile Tester 6 or is it completely replaced?

Webinar_Question

Does PI have some PROFINET diagnostics guidelines for diagnostic purpose of PROFINET network?

Webinar_Question

Is it planned to release a Linux-compatible version of the Automated RT Tester?

Webinar_Question

We have a controller, which also supports the device functionality as an I-Device. Will the I-Device get a separate certificate, or will it be integrated in the controller certificate?

Webinar_Question

Which features do virtual instances (controller and devices) need to support within PROFINET certification?

Webinar_Question

Configuration of TSN networks might be a challenge (depending on the network). How relevant might PROFINET cycle times below 250 microseconds be for the PROFINET market in future (with and without TSN support)?

Webinar_Question

PROFINET specification talks about PROFINET cycle times below 250 microseconds (DFP etc).
Are there currently IO Controllers available (in the market) which support PROFINET cycle times below 250 microseconds?

Search found 112 matches

What are the requirements for the PC, operating system and network card for ETS setup?

Will Security class I support be mandatory for PN certification?

How do I get the update for the ETS? Is it in the test bundle and for free?

When do you expect the trial bundles to become the "official" certification tool?

Will the CP1616 also be replaced for SPIRTA and the PROFIsafe Layer Tester?

Could you please share detailed information about the ETS HW used in certification?

Will the netload robustness test also be transferred to the ETS?

What is the use of APL rate limiter in ETS APL test setup?

Cybersecurity

Evolution kit

Switches with high port counts

Conformance tests

Can you please provide more information on the status and future plans for PROFIdrive / Encoder Profile Tester?

Do I need to wait for PROFINET Test Bundle Version 2.45 to use the ETS for precertification?

To certify a PROFINET controller a file (comparable to the GSD file) is needed. Where do I get this file from?

If a PROFINET device is only produced for one manufacturer, does it still have to be certified?

Can an existing GSD V2.42 be extended to include a new device as of June / July 2024?

Can the ART Tester handle only the latest GSDML file version, or is it downward compatible?

Configuration of a device for certification testing with different modules/submodules.

Is the version of the ETS board always the same, or does it change? Is a new version planned?

Certification is mandatory before a device can be offered for sale. What exactly does that mean?

If I use a microchip with a certified PROFINET stack to develop my new device, do I need to get the certification ... ?

Will it be possible to buy all the needed hardware as a bundle? And if, what is the price?

Is it possible to use the CP1616 with the upcoming PROFIdrive Profile Tester 6 or is it completely replaced?

Does PI have some PROFINET diagnostics guidelines for diagnostic purpose of PROFINET network?

Is it planned to release a Linux-compatible version of the Automated RT Tester?

Will a I-Device get a separate certificate, or will it be integrated in the controller certificate?

Which features do virtual instances (controller and devices) need to support within PROFINET certification?

How relevant might PROFINET cycle times below 250 microseconds be for the PROFINET market in future (w/wo TSN support)?

Are there currently IO Controllers available (in the market) which support PROFINET cycle times below 250 microseconds?