Would a Cortex R also be sufficient for a PN protocol stack?
Replies: 1

How to read profinet data string
Replies: 1

Automated RT Tester
Replies: 1

Use python to connect to profinet devices
Replies: 1

Crush test of cable
Replies: 1

Does PI have some PROFINET diagnostics guidelines for diagnostic purpose of PROFINET network?
Replies: 1

Is there a limitation of 64 Devices in a PROFINET IRT-network or IRT-domain?
Replies: 1

Is there a way to expand the data frame of 1440 byte?
Replies: 1

Do we really need managed switches in PN networks? If so, what is the technical reason behind it?
Replies: 1

Is the PN cycle time configured on the device or can it be set by the PLC?
Replies: 1

Are there currently IO Controllers available (in the market) which support PROFINET cycle times below 250 microseconds?
Replies: 1

How relevant might PROFINET cycle times below 250 microseconds be for the PROFINET market in future (w/wo TSN support)?
Replies: 1

Does PROFINET have a similar mechanism to SystemCommand?
Replies: 1

Is it possible to have a compact and a modular head unit in the same rack?
Replies: 1

Is there standard PROFINET support for remote device firmware update?
Replies: 1

Where to define if a device is modular or compact?
Replies: 1

Is there a recommendation for a switch-chip with 2 ports to integrate into a device?
Replies: 1

Controller configuration vs PC parameterization
Replies: 1

Trace
Replies: 1

Is there a function like the rack optimisation in CIP EthernetIP for head devices in PROFINET?
Replies: 1

More than 1024 byte to transfer
Replies: 1

Hardware-based solution
Replies: 1

Tool Calling Interface (TCI)
Replies: 1