Profinet as a software solution

Bill84
Posts: 3
Joined: 04 Oct 2023, 10:40

Profinet as a software solution

Post

Is it possible to add Profinet to my device using a software solution ?​
benja_m
Posts: 20
Joined: 06 Oct 2023, 09:24

Post

Bill84 wrote: 04 Oct 2023, 11:27 Is it possible to add Profinet to my device using a software solution ?​
Yes, it is possible. There are some vendors available offering such software-only solutions.

Depending on hardware capabilities, you may have some limitations such as
  • not reaching the highest specified netload class
  • not reaching fastest specified network update time
  • not being able to have a synchronized communication (IRT or TSN Streams)
But for most devices, that will not be a sevear issue.
ip01
Posts: 1
Joined: 06 Oct 2023, 13:15

Re: Profinet as a software solution

Post

Is the pi profinet-community-stack a suitable start point for creating a client software implementation on Windows PC?
benja_m
Posts: 20
Joined: 06 Oct 2023, 09:24

Post

ip01 wrote: 06 Oct 2023, 13:19 Is the pi profinet-community-stack a suitable start point for creating a client software implementation on Windows PC?

I advise you not to go that way unless you are very experienced with Profinet. The Community Stack is only a pure Protocol stack without dedicated APIs for the application and only an example adaption to Ethernet.

I recommend using a dedicated SDK from a technology provider, which can off course base on the Community Stack.
Thanatos
Posts: 1
Joined: 12 Oct 2023, 19:13

Post

Bill84 wrote: 04 Oct 2023, 11:27 Is it possible to add Profinet to my device using a software solution ?​
Hey Bill! ok you just blew my mind... Can you back this truck up for us newbies? :D
What type of device are you thinking?
and somehow you are going to implement Profinet onto it? :shock:
Hmutlu
Posts: 5
Joined: 20 Oct 2023, 12:31

Re: Profinet as a software solution

Post

Bill84 wrote: 04 Oct 2023, 11:27 Is it possible to add Profinet to my device using a software solution ?​

please check the below solution;

https://mall.industry.siemens.com/mall/ ... s/10228079
FloLi
Posts: 1
Joined: 08 Jan 2024, 12:12

Re:

Post

benja_m wrote: 09 Oct 2023, 09:11
ip01 wrote: 06 Oct 2023, 13:19 Is the pi profinet-community-stack a suitable start point for creating a client software implementation on Windows PC?

I advise you not to go that way unless you are very experienced with Profinet. The Community Stack is only a pure Protocol stack without dedicated APIs for the application and only an example adaption to Ethernet.

I recommend using a dedicated SDK from a technology provider, which can off course base on the Community Stack.
Can you point out some Profinet SDK providers?
Is it possible to get the community stack for evaluation before deciding on a membership?
benja_m
Posts: 20
Joined: 06 Oct 2023, 09:24

Re: Re:

Post

FloLi wrote: 08 Jan 2024, 12:17
benja_m wrote: 09 Oct 2023, 09:11
ip01 wrote: 06 Oct 2023, 13:19 Is the pi profinet-community-stack a suitable start point for creating a client software implementation on Windows PC?

I advise you not to go that way unless you are very experienced with Profinet. The Community Stack is only a pure Protocol stack without dedicated APIs for the application and only an example adaption to Ethernet.

I recommend using a dedicated SDK from a technology provider, which can off course base on the Community Stack.
Can you point out some Profinet SDK providers?
Is it possible to get the community stack for evaluation before deciding on a membership?
Did you have a look here: https://www.profinet.com/profinet-expla ... ementation
There is a page linked showing technology providers. This can give you a hint.
Ask another Question