Spirta + CP1616 testing - Synchronous AR
Posted: 14 May 2025, 17:44
Hello,
We have a drive connected to a PC equipped with CP1616 and Spirta. We bought the CP1616 to test the drive before going to a PROFINET lab and try the certification (RT and IRT).
I was expecting Spirta to establish a synchronous communication with the drive (for example in test Syncslave01_WFU)... what I get instead is that, every time the application relation is configured, Spirta sets the cycle time but the synchronization mode is always non-synchronous.
I am pretty sure that the IRT specifications in the GSDML file are ok as well as the drive configuration (we use the HMS Anybus CompactCom 40 PIR to interface the network).
What kind of AR should I expect to be established by Spirta? Any suggestion please?
Thank you, regards.
Michel
We have a drive connected to a PC equipped with CP1616 and Spirta. We bought the CP1616 to test the drive before going to a PROFINET lab and try the certification (RT and IRT).
I was expecting Spirta to establish a synchronous communication with the drive (for example in test Syncslave01_WFU)... what I get instead is that, every time the application relation is configured, Spirta sets the cycle time but the synchronization mode is always non-synchronous.
I am pretty sure that the IRT specifications in the GSDML file are ok as well as the drive configuration (we use the HMS Anybus CompactCom 40 PIR to interface the network).
What kind of AR should I expect to be established by Spirta? Any suggestion please?
Thank you, regards.
Michel