PROFINET Forum

Has the Test Setup to be changed for some MRP Tests or does the ETS Board be enough?

Webinar_Question wrote: ↑24 Nov 2025, 09:49 Has the Test Setup to be changed for some MRP Tests or does the ETS Board be enough?

Some testcases require a different test setup than others. This is documented in Test specification.

In the certification tool, these testcases are bundled in separat folders. You will find

• ETS Test Setup (the default, connect dut to ETS board)
• ETS Test Setup extended for FSU (only for FSU tests, Scalance switch between dut and ETS board required)
• MRP Setup (only for some MRP tests, Siemens PLC needed in addition to dut and ETS)

In addition, the netload tests require another setup (not using ETS board at all).